I saw the device online and thought that it was just way too expensive. First thought was wood, but drilling the holes would be a nightmare. So here we are. Device is split into parts due to size. I made holes on both sides to take 2 1/2" locating pins, to help with glue up. Search for tour aim if you want an example of how to best use it.
Device is made for 7mm alignment rods.
Note.....Ver 2 has holes for driver, 5i and wedge. I wasn't sure about print's integrity so I didn't do all the holes from original product. I also increased the size of the holes for the rods that lay flat as they don't need to be as tight as I had them.
| Kens_Aim_4in_ext.stl | 38.6KB | |
| Kens_Aim_main.stl | 203.9KB | |
| Kens_Aim_main_v2.stl | 578.7KB | |
| Kens_Aim_pin_.stl | 20.4KB |
