Gol D Roger – One Piece – Made W/ HueForge 3D Printer Model
The file 'Gol D Roger – One Piece – Made W/ HueForge 3D Printer Model' is (stl) file type, size is 11.9MB.
The file 'Gol D Roger – One Piece – Made W/ HueForge 3D Printer Model' is (stl) file type, size is 11.9MB.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Elegoo Gray Transmission Distance: 3
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Gray
At layer #11 (0.96mm) swap to White for the rest.
| Gol_D_Roger_Front_125x150.stl | 45.1MB |
