Gnarly Primo Frame Self-adjusting Battery Holder 3D Printer Model
The file 'Gnarly Primo Frame Self-adjusting Battery Holder 3D Printer Model' is (stl) file type, size is 958.6KB.
The file 'Gnarly Primo Frame Self-adjusting Battery Holder 3D Printer Model' is (stl) file type, size is 958.6KB.
A self-adjusting battery mount/holder for Gnarly FPV Primo frame. I have various brands and sizes of 2S Lipo batteries. The stock battery holders came with Primo kit don't fit some of my batteries. So I created this mount that has a self-adjusting feature to fit all my batteries, such as RDQ 2S 450, RDQ 2S 300mah, Tattu 2S 450, Betafpv 2S 350, etc.
Printed it using 20-30% infill 0.24mm layer height TPU.
5/12/2019 - Added version 2.
5/19/2019 - Removed version 2 and replaced with Version 3. (Version 2's hole was slightly off and not centered correctly).
5/19/2019 - Added Versions 4 and 5 per request for larger batteries.
Changed the design slightly to accommodate slightly bigger batteries. Version 4 is very stretchy, but a bit too stretchy for my other smaller batteries. Version 5 seems to be a good balance - stretchy enough but not too loose.
You may need to play with infill settings to best fit your larger batteries.
I used 0.24mm layer height 50% infill for version 5.
Version 3 works best for Tattu 2S 450mah and RDQ 2S 450mah. I used 0.24mm layer height and 30% infill. If you are not sure which version to use, start with version 3.
| 13_x_19.5_Gnarly_Primo_Self-adjusting_Battery_Mount.stl | 468.1KB | |
| 14.5_x_20.5_Gnarly_Primo_Self-adjusting_Battery_Mount.stl | 455.5KB | |
| Gnarly_Primo_self-adjusting_Battery_Mount.stl | 435.2KB | |
| V3_Gnarly_Primo_self-adjusting_Battery_Mount.stl | 461.0KB | |
| V4_Gnarly_Primo_self-adjusting_Battery_Mount.stl | 449.1KB | |
| V5_Gnarly_Primo_self-adjusting_Battery_Mount.stl | 449.2KB |
