attempt to replace Cyano Acrylate bottle nozzle.
the good news is the threads work, the bad news is the tip is too big on the larger model to be of much use as a glue tip for CA but may work for white glues.
revised file has a much smaller applicator tip for superglues. It printed a little better but the overhang is difficult. Also the tip did not print all the way to the top with my printer for some reason. print the tip portion at 1.1 scale if you have the same bottle to make the cap fit better.
revised4 file is has a sloped overhang to fix printing issues on my
printrbot 1405 and is scaled slightly to fit the existing glue cap better. I will try to print it now and see if it works better than the previous model.
revised 4 flat is resized for the cap, but with the flat applicator section so that the model can be printed in 2 parts if the overhang does not work out on your printer.
| gluebottletip_revised.stl | 319.6KB | |
| gluebottletip_try1.stl | 144.8KB | |
| gluetipV4.stl | 308.6KB | |
| gluetipV4flat.stl | 313.8KB | |
| gluetipV4point4.gcode | 2.4MB |
