To make this you need automatically flashing RGB LEDs and 3V tablet battery like CR2032 or similar. Also, you should use 1.5x0.2 mm solar busbar wire ribbon for making a switch.
This thing included eleven different models with switch integrated. Just print and assembly.
For assembling you need a small piece of 1.75 mm filament about 1 cm length. Also needed two copper busbar wire about 2 cm length for making contact group. The filament of 4 mm length inserts into the switch_main part to make rotation limiter. After that insert busbar in a slit and turn down. Place busbar into side holes and bend. Insert switch_main with busbar into switch_ring For complete assembly insert filament through the holes in switch_main and switch_stopper part.
Use a CRxxxx Battery Holder Generator to make a holder for battery power supply.
Video of bauble in action https://youtu.be/4B_Ifhq_KtI
CubeFiveCompound_shell_noose.stl | 512.7KB | |
CubeTenCompound_shell_noose.stl | 955.7KB | |
DodecahedronFiveCompound_shell_noose.stl | 706.0KB | |
DodecahedronSixCompound_shell_noose.stl | 740.0KB | |
IcosahedronFiveCompound_shell_noose.stl | 544.5KB | |
IcosahedronSixCompound_shell_noose.stl | 874.0KB | |
MathematicaPolyhedron_shell_noose.stl | 426.9KB | |
PentagonalPrismSixCompound_shell_noose.stl | 642.0KB | |
RhombicEnneacontahedron_shell_noose.stl | 463.1KB | |
SmallTriambicIcosahedron_shell_noose.stl | 409.0KB | |
switch_main.stl | 2.5MB | |
switch_stoper.stl | 319.4KB | |
TetrahedronFiveCompound_solid_noose.stl | 453.8KB |