I have the misfortune of owning an evil and vindictive bastard cat, who, for reasons unknown, decided to take a piss in my open 1st edition Gloomhaven box. I had it open whilst I was reorganising and waiting for the YY-Guys excellent monster box prints (https://www.thingiverse.com/thing:2797796) to finish. Now luckily, I'd sleeved the cards and left them in the plastic bags inside the character boxes so they were undamaged - however, the cardboard character boxes are now totally ruined with dried cat pee.
As such, I needed a new character storage solution, which I based off https://www.thingiverse.com/thing:2797796. I decided to flatten the lid and emboss each one with a large character symbol, and provide room to store the sleeved character cards, a complete set of sleeved modifier cards (i.e. 20 standard modifier + the character specific cards), the character board and the character sheets. I also provided a pocket to store the tiny character tokens. There's space enough left to store some coins as well.
Rather than print the character icon on the top side of the box, I chose to provide a slot in the top of the base to glue on a separately printed circular character icon.
Needless to say, I have decided to eat the cat.
23/06/2019 - I've added lid and icon for the new Diviner class from the Forgotten Circles expansion.
07/07/2018 - Note that this is still a work in progress, as I have only printed the Scoundrel box and lid. I haven't printed the character icons yet, so they may need shrinking to fit in the slot.
20/07/2018 - Note, that you will need to scale the character icons slightly to get them to fit in the slot. I printed the icons with a 0.25mm nozzle and scaled them to 98.9%, and they fit perfectly. I haven't tried it with a standard 0.4mm nozzle, but I'd expect a similar scaling will be necessary. I'll update the STL files at some point.
03/10/2018 - Uploaded repaired character box lids and a box variant allowing two sets of horizontal small cards. The box size is identical to the original design. Note, that these slots should fit the MayDay Mini Euro sleeved cards.
11/03/2020 - Uploaded a blank character box lid as requested.
| CharacterBox_Lid_BeastTyrant_repaired.stl | 89.8KB | |
| CharacterBox_Lid_Berserker_repaired.stl | 52.6KB | |
| CharacterBox_Lid_Blank.stl | 47.5KB | |
| CharacterBox_Lid_Brute_repaired.stl | 82.4KB | |
| CharacterBox_Lid_Cragheart_repaired.stl | 45.6KB | |
| CharacterBox_Lid_Diviner.stl | 165.3KB | |
| CharacterBox_Lid_DoomStalker_repaired.stl | 72.4KB | |
| CharacterBox_Lid_Elementalist_repaired.stl | 52.0KB | |
| CharacterBox_Lid_MindThief_repaired.stl | 60.0KB | |
| CharacterBox_Lid_Nightshroud_repaired.stl | 61.2KB | |
| CharacterBox_Lid_PlagueHerald_repaired.stl | 103.5KB | |
| CharacterBox_Lid_Quartermaster_repaired.stl | 59.6KB | |
| CharacterBox_Lid_Sawbones_repaired.stl | 54.7KB | |
| CharacterBox_Lid_Scoundrel_repaired.stl | 104.6KB | |
| CharacterBox_Lid_Soothsinger_repaired.stl | 57.4KB | |
| CharacterBox_Lid_Spellweaver_repaired.stl | 67.4KB | |
| CharacterBox_Lid_Summoner_repaired.stl | 151.7KB | |
| CharacterBox_Lid_Sunkeeper_repaired.stl | 61.6KB | |
| CharacterBox_Lid_Tinkerer_repaired.stl | 103.9KB | |
| CharacterBox_Std.STL | 58.9KB | |
| CharacterBox_Std_HorizontalSlots.stl | 58.6KB | |
| Icon_BeastTyrant.STL | 56.7KB | |
| Icon_Berserker.STL | 20.2KB | |
| Icon_Brute.STL | 46.8KB | |
| Icon_Cragheart.STL | 12.8KB | |
| Icon_Diviner.STL | 125.3KB | |
| Icon_Doomstalker.STL | 39.5KB | |
| Icon_Elementalist.STL | 16.7KB | |
| Icon_MindThief.STL | 26.8KB | |
| Icon_Nightshroud.STL | 28.4KB | |
| Icon_Plagueherald.STL | 66.5KB | |
| Icon_Quartermaster.STL | 24.9KB | |
| Icon_Sawbones.STL | 22.3KB | |
| Icon_Scoundrel.STL | 69.4KB | |
| Icon_Soothsinger.STL | 24.1KB | |
| Icon_Spellweaver.STL | 34.7KB | |
| Icon_Summoner.STL | 115.9KB | |
| Icon_Sunkeeper.STL | 31.7KB | |
| Icon_Tinkerer.STL | 69.0KB |
