Glock “compensator” Ultra Slim (airsoft) 3D Printer Model
The file 'Glock “compensator” Ultra Slim (airsoft) 3D Printer Model' is (stl,zip) file type, size is 480.5KB.
The file 'Glock “compensator” Ultra Slim (airsoft) 3D Printer Model' is (stl,zip) file type, size is 480.5KB.
Ultra slim fake-compensator that does not add anything to the height (or width) of the gun and is only ~6mm long!
Designed for a KJW G23 gbb but should fit any airsoft Glock (you might have to adjust the position of the part that grabs into the groove of the rail)
(designed using this glock frame model to get the cross-section of the rail: https://www.thingiverse.com/thing:2284125)
I included versions with built-in brim around the corners with a height of 0.1, 0.2 and 0.3mm depending on your first-layer height.
-print without support
-the pattern on the front has 36° overhang so you might need cooling
-use smaller nozzle Diameter for sharper edges in the pattern (I used 0.5mm for the one on the photos and it's ok but not great)
tinkercad link for making adjustments:
https://www.tinkercad.com/things/h8Lorh5LUuA-glock-battlecomp-slim
| glock_compensator_slim_0.1mm_support.stl | 169.3KB | |
| glock_compensator_slim_0.2mm_support.stl | 170.3KB | |
| glock_compensator_slim_0.3mm_support.stl | 169.3KB | |
| glock_compensator_slim_all_files.zip | 237.6KB | |
| glock_compensator_slim_no_support.stl | 151.5KB | |
| glock_compensator_slim_only_support_0.1mm.stl | 13.8KB | |
| glock_compensator_slim_rail_attachment_part.stl | 1.4KB | |
| glock_compensator_slim_without_rail_attachment_part.stl | 147.5KB | |
| glock_compensator_ultra_slim_rail_profile_only.stl | 18.1KB |
