Glock Carbine Kit (Airsoft) 3D Printer Model
The file 'Glock Carbine Kit (Airsoft) 3D Printer Model' is (stl,docx) file type, size is 15.9MB.
The file 'Glock Carbine Kit (Airsoft) 3D Printer Model' is (stl,docx) file type, size is 15.9MB.
Yet another carbine kit. Printed in ABS and Acetone vapor bath (No paint at all here)
This is a co-work job between sebastian viking-bengt simmons and myself. I needed to mention this because Seb has participated a lot in this.
You are not authorized to sell this model, nor the printed model. you can however print it for yourself and enjoy. Or we can print it for you.
Instructions are included on how to assemble the kit.
Hardware needed:
-2 x M4 nuts for the rear stock mount
-2 x M4 40mm screws for the rear stock mount (someone mentioned its 50mm, I need test it again) UPDATE: Its definately working for me with 40mm screws
-1 x M3 40mm for the charging handle
-1 x M3 30mm for the lower body front screw
-1 x M3 25mm for the lower body rear screw
-2 x M3 nuts for the lower body
-1 x M3 40mm screw for the upper body (lock on the Glock rail)
-1 x M3 nut for the upper body (lock on the Glock rail)
-9 x 6x7/16 blac framing screws for the rails (not needed if you print the body with rails)
I have included the body in 2 sections for those with smaller printers. If needed I can also split the top rail in 2. you will need 200mm printer. Use the body joiner stl to fix the 2 parts together.
Print with PETG or ABS or even HIPS. You could try PLA+ too if you plan not leaving the carbine kit in a hot car.
If you plan printing the main body in 2 pieces, I suggest using ABS to be able to solder the 2 parts together with Acetone.
Compatibility: TM G17, WE G17/G18C, KWC G17.. probably fits other brands too, but I have not tested. Would be nice to keep track of the fit, so please let me know
NOTE: The access to the slide release is not needed. When the mag empties out, just put in a new mag, and pull on the charging handle, and it will release.
If you would like to tip, I would apreciate it.
You need 400mm printer height for this project or 200mm if you print in 2
Change log:
-2018-10-12: fixed design symetry. Added the body in 2 parts with a joiner, so you can print with a 200mm printer height.
-2018-10-30: Splitted the top rail in 2 so you can print it with a smaller printer
-2018-11-20: holes were missing on the body for the lower rail. fixed it.
Videos:
https://www.youtube.com/watch?v=mA6N4FNt-ns
https://www.youtube.com/watch?v=qPpIqGRypZ8
https://www.youtube.com/watch?v=V8DO07aLPL8&t=17s
| Glock-Carbine-body-front.stl | 787.5KB | |
| Glock-Carbine-body-rear.stl | 509.1KB | |
| Glock-Carbine-body.stl | 1.2MB | |
| Glock-Carbine-Buffer_tube_marked.stl | 408.8KB | |
| Glock-Carbine-Charging_handle_marked.stl | 416.7KB | |
| Glock-Carbine-Charging_handle_mount.stl | 10.0KB | |
| Glock-Carbine-Lower_body_marked.stl | 715.4KB | |
| Glock-Carbine-Lower_rail_marked.stl | 715.5KB | |
| Glock-Carbine-Rear_Buffer_tube_mount_marked.stl | 423.4KB | |
| Glock-Carbine-Top_rail_front_marked.stl | 217.5KB | |
| Glock-Carbine-Top_rail_marked.stl | 428.7KB | |
| Glock-Carbine-Top_rail_rear_marked.stl | 249.3KB | |
| glock_carbine_-body_joiner.stl | 684.0B | |
| Glock_Carbine_kit_assembly_instructions.docx | 13.6MB |
![AAP-001 Raptor Handle [re-mesh] 3D Printer Model](https://res.3axis.co/3f718800-b572-4830-a782-c1a70c98a9d9/images/a84de9db-cd06-4713-8fe2-0c039343875e_thumb.jpg)
