https://www.youtube.com/watch?v=XNEC46LS174
UPDATE 27.03.19
Uploaded a version 2 with some small improvements and in 2 different weights. (see picture) I did not delete V1.
Easy to print and assembly Glide Bait. 100% working! No epoxy needed!
I worked really long on this lure, so please leave a like, a make and maybe a small tip!!!
There are 4 different Heads and 2 different Fin parts. You will figure it out ;)
I also designed Line Thru Head versions. You find them under remix.
For assembly instructions look here and scroll down: https://www.thingiverse.com/thing:3024248
Print settings:
100% infill!!!
2 outer walls
0.1 - 0.2mm layer height
no support
no top and bottom layers (only important for S3D users)
Print orientation like on pic 2!!!
I allways drop one pellet of silica gel with tweezers into every air chamber while printing. So i have a rattle sound and i notice when there is water inside. (then there is no rattle sound anymore)
But with my printer and settings it is waterproof without epoxy.
If you want to support me, check out my other lures i sell:
https://cults3d.com/en/3d-model/gadget/crankbait-fishing-lure-domi1988
https://cults3d.com/en/3d-model/gadget/fat-crankbait-easy-to-print-and-build-one-piece-print
https://cults3d.com/en/3d-model/gadget/4-piece-swimbait-fishing-lure-14cm-easy-print-and-build
| Glidebait.stl | 2.5MB | |
| Glidebait_Details.stl | 3.2MB | |
| Glidebait_Details_onehook.stl | 3.2MB | |
| Glidebait_Fin_1.1.stl | 2.7MB | |
| Glidebait_Fin_onehook.stl | 2.4MB | |
| Glidebait_onehook.stl | 2.5MB | |
| v2_Head_heavy.stl | 3.5MB | |
| v2_Head_light.stl | 3.9MB | |
| v2_Tail_heavy.stl | 2.4MB | |
| v2_Tail_light.stl | 2.5MB |
