I needed glass clamps / brackets to hold glass panels together to make a shelving unit. I didn't want to pay loads for some on ebay or amazon so I designed them myself enjoy!
These are designed at 5mm in order to fit 3/16" glass panels.
There are 4 parts designed:
(90 degree corner)
(180 degree or tee)
(4 way or all way corner)
(3 way corner)
some orientation on the print bed is recommended for best print.
| Glass_90_degree.SLDPRT | 71.9KB | |
| Glass_90_degree.STL | 6.5KB | |
| Glass_All_Way.SLDPRT | 113.2KB | |
| Glass_All_Way.STL | 15.5KB | |
| Glass_Tee_Way.SLDPRT | 107.4KB | |
| Glass_Tee_Way.STL | 7.7KB | |
| Glass_Three_Way.SLDPRT | 119.6KB | |
| Glass_Three_Way.STL | 11.4KB |
