Gizo’s Santa Hat 3D Printer Model
The file 'Gizo’s Santa Hat 3D Printer Model' is (stl) file type, size is 190.0MB.
The file 'Gizo’s Santa Hat 3D Printer Model' is (stl) file type, size is 190.0MB.
Gizo is finally getting into the Christmas spirit so I made him a festive hat. One version is for when he is sitting pretty, and the other is for when he feels like hanging around.
Each version comes either solid or divided by red/white. The divided ones will print in multi-material printers or printed separately to be joined later. To fit Gizo’s curves, the bottom needs support material.
Gizo's leg tollerances are tighter than the original due to remeshing. To free the legs, use a flat head screw driver above the leg/below the body and lever the leg down.
Patreons get additional Gizo costumes, including a new X-Mas Spi-Deer. Check it out: https://www.patreon.com/merganmcfergan
Happy Holidays to you and yours!
| GizoEyeLG.stl | 2.2MB | |
| GizoEyesDualPrint.stl | 9.6MB | |
| GizoEyeSM.stl | 2.4MB | |
| GizoSantaDown.stl | 44.3MB | |
| GizoSantaUp.stl | 39.5MB | |
| GizoUpSidDwn.stl | 125.1MB | |
| GizSantaDnBase.stl | 51.8MB | |
| GizSantaDnTop.stl | 48.1MB | |
| GizSantaUpBall.stl | 47.9MB | |
| GizSantaUpBase.stl | 58.4MB | |
| GizSantaUpMid.stl | 38.0MB |
