GIRO – Bed Leveling Wheel / Thumb Nut 3D Printer Model
The file 'GIRO – Bed Leveling Wheel / Thumb Nut 3D Printer Model' is (stl) file type, size is 894.0KB.
The file 'GIRO – Bed Leveling Wheel / Thumb Nut 3D Printer Model' is (stl) file type, size is 894.0KB.
If you like my work and find it usefull then I would be very happy if you could download the files via Printables as linked below and follow me on Printables.
This is a newly designed Bed Leveling Knob for several 3D printers. It uses a M3 thumb nut for M3 screws. If your Heatbed doesn't use M3 screws than this bed leveling wheel can't be used.The outer diameter of the bed leveling wheel is 35mm.
You will need additional thumb nuts for these knobs.
Additional Parts
4x DIN 466 M3 Thumb Nuts
Version 1.0
This is the first intended prototype and design.
I would recommend to use at least 2 perimeters. Print with a lower speed, for example 30 mm/s, to get a more accurate printing. I recommend to print it with at least 50% Infill. Support structures are needed.
Let me know if there are any kind of problems with the bed leveling wheel. I will try to help and if neccessary correct the design. I appreciate any kind of feedback to this bed levelingm wheel.
| GIRO.Bed_Leveling_Wheel.stl | 3.0MB |
