Base print at 0.2mm (Black Model)
Rest of all the other parts print in 0.1mm
Tip: When you print the inners, make sure you print them at 0.5 % smaller... So If the black part is printed at 80%, then the rest should be around 79.50%
| GirBlack.stl | 578.5KB | |
| GirEyes.stl | 28.6KB | |
| GirGreen.stl | 125.9KB | |
| GirTounge.stl | 8.9KB | |
| GirZip.stl | 33.9KB |
