Ginza Core Building.. Japanese N-scale 3D Printer Model
The file 'Ginza Core Building.. Japanese N-scale 3D Printer Model' is (stl) file type, size is 186.3KB.
The file 'Ginza Core Building.. Japanese N-scale 3D Printer Model' is (stl) file type, size is 186.3KB.
My attempted rendition of the Ginza Core building.
Some artistic licence used
Has not been built yet, will post a "make" once done.
Edit 29/12
Got the depth of the spacers and glass wrong for whole top section.
Hopefully fixed now.
Edit 6th Feb 2024.
Ground floor and L1 windows and entrance now done with flat glass + frames
Suggest print frames dark colour so they can be seen properly.
| Ginza_Core_centre_glass.stl | 1.4KB | |
| Ginza_Core_facade_centre.stl | 83.0KB | |
| Ginza_Core_facade_left.stl | 83.2KB | |
| Ginza_Core_facade_right_.stl | 83.0KB | |
| Ginza_Core_frame_main_entrance_x2.stl | 20.5KB | |
| Ginza_Core_glass_centre_bottom.stl | 1.4KB | |
| Ginza_Core_glass_centre_L1.stl | 684.0B | |
| Ginza_Core_glass_ground_centre.stl | 684.0B | |
| Ginza_Core_glass_ground_x2.stl | 2.8KB | |
| Ginza_Core_glass_L1_x2.stl | 2.8KB | |
| Ginza_Core_glass_left_and_right.stl | 1.4KB | |
| Ginza_Core_glass_main_entrance_x2.stl | 684.0B | |
| Ginza_Core_Ground.stl | 47.4KB | |
| Ginza_Core_ground_angled_frame_LI_x2.stl | 3.2KB | |
| Ginza_Core_ground_frame.stl | 4.6KB | |
| Ginza_Core_ground_front_frame.stl | 1.6KB | |
| Ginza_Core_L1_angled_frame_x2.stl | 3.2KB | |
| Ginza_Core_L1_front_frame_x2.stl | 2.0KB | |
| Ginza_Core_L1_window_frame.stl | 3.6KB | |
| Ginza_Core_Level_1.stl | 94.3KB | |
| Ginza_Core_spacer_left_2.stl | 13.4KB | |
| Ginza_Core_spacer_levels.stl | 13.4KB | |
| Ginza_Core_spacer_right.stl | 13.4KB | |
| Ginza_Core_top.stl | 351.3KB |
