Gimbaled Cup Holder For Sailboat 80mm Opening 3D Printer Model
The file 'Gimbaled Cup Holder For Sailboat 80mm Opening 3D Printer Model' is (stl) file type, size is 982.8KB.
The file 'Gimbaled Cup Holder For Sailboat 80mm Opening 3D Printer Model' is (stl) file type, size is 982.8KB.
Gimbaled Cup holder for sailboat. it was designed to hold Yeti style bottles and also soda or been cans. To be mounted on any vertical 1in tube/rail. I used 316 stainless steel hardware for the pivot points and tube clamp.
You will need to print:
Cup bottom : 1
Cup holder: 4
inner: 1
Knob: 2
middle: 1
mount 1: 1
mount 2: 1
List of hardware for 1 holder:
4 - 316 Stainless Steel Socket Head Screw - ½ - 10-32 - https://www.mcmaster.com/90666A013/
4 - Zinc-Plated Brass Unthreaded Spacer - https://www.mcmaster.com/90309A815/ - You can get SS for this one the the cost is much higher. Brass will work fine
The Screw and nut bellow can be found in a hardware store.
2 - 316 Stainless Steel Hex Head Screw - ¼ 20 - https://www.mcmaster.com/93190A544/
2 - 316 Stainless Steel Hex Nut - ¼ 20 - https://www.mcmaster.com/90242A425/
| Cup_bottom.stl | 455.6KB | |
| cup_holder.stl | 55.5KB | |
| inner.stl | 558.0KB | |
| Knob_1.stl | 344.0KB | |
| middle.stl | 695.4KB | |
| mount_1.stl | 948.5KB | |
| mount_2.stl | 121.2KB |
