Gilbert Engineering – Spiral Tree Stand | 20mm Electrical Installation Pipe 3D Printer Model
The file 'Gilbert Engineering – Spiral Tree Stand | 20mm Electrical Installation Pipe 3D Printer Model' is (3mf,stl) file type, size is 1.5MB.
The file 'Gilbert Engineering – Spiral Tree Stand | 20mm Electrical Installation Pipe 3D Printer Model' is (3mf,stl) file type, size is 1.5MB.
This are parts for the GE spiral mini tree. It's designed to use 20mm electrical pipes (e.g. https://www.obi.at/leerrohre/isolierrohr-starr-en-20-laenge-2-m/p/1846310 )
I cutted the 2 meter pipe in the following dimensions:
25 cm for every leg
90 cm for the main shaft
so you'll need one 2 Meter pipe for every Spiral mini tree
Drawn from scratch but It's heavily inspired by https://www.thingiverse.com/thing:4680632 and https://www.thingiverse.com/thing:4905635
Thanks to bowhunter3125 and graftyman for their great designs!
The spiral tree prop can be mounted on the top - cover with one screw and zip-ties. On the bottom its screwed to one leg (GE_SpiralTree_Stand_1x_CoverLeg_Mount.stl)
One complete set consists of:
1x GE_SpiralTree_Stand_1x_CoverLeg_Mount.stl
3x GE_SpiralTree_Stand_3x_CoverLeg.stl
1x GE_SpiralTree_Stand_1x_Base.stl
1x GE_SpiralTree_Stand_1x_CoverTop.stl
and fits on one Buildplate on my Bambu X1C. 3Mf File also provided
Center shaft has an inner structure for more sturdiness. The top - Cover is not finished yet, will be added in the next 2-3 weeks.
Designed to be secured with 4x20 Screws
| GE_SpiralTree_Stand.3mf | 735.5KB | |
| GE_SpiralTree_Stand_1x_Base.stl | 1.2MB | |
| GE_SpiralTree_Stand_1x_CoverLeg_Mount.stl | 696.3KB | |
| GE_SpiralTree_Stand_1x_CoverTop.stl | 445.5KB | |
| GE_SpiralTree_Stand_3x_CoverLeg.stl | 190.0KB |
