EMT Mount for the Gilbert Engineering Fuzion.
This is a second version of the Fuzion mount that I have created. It uses the traditional + center mount vs the H design of the other mount.
Perimeters are your friend for strength in mounts. I use 4-5 perimeters and top/bottom layers at minimum.
To attach the center support to the outer supports in the center, use a 1/2" PVC Cross T with the EMT bushings you can print in my other designs. I use self tapping screws to drill through the PVC to remove any movement.
| fuzion-side-v2.stl | 417.2KB | |
| fuzion-v2-center.stl | 571.0KB | |
| fuzion_v2_top-bottom.stl | 490.6KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
