Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068

Custom display base are also available from $5! Contact me to discuss what you want!

If you like my work, you can support me through Patreon: https://www.patreon.com/gigapenguin3dprints/posts

Compiled RAR file is available in download section!

Standalone car lift available too: https://www.printables.com/model/243829-hot-wheels-164-scale-car-lifts

Description

A generic garage display made to fit 3 cars, the front of the garage mascot is based on Koupen Chan design.

The cars I used in the photos are:

• Nissan S14 Vertex (Tarmac Works/Global64)
• Mitsubishi Lancer Evolution 8 (Johnny Lightning)
• Nissan Skyline GT-R R32 Nismo (Mini GT)

If you wish to have a display base tweaked to fit to a different car from a different brand, please send me these dimension for the display base holes: https://imgur.com/5T6mb2L

The display base is separated into many parts for easy printing and colour swap. The base parts are:

1) Base (BaseV1.STL)
2) Flat Base (FlatBase.STL & FlatBase - No Holes.STL)

The garage wall parts:

1) Front of the garage (GarageFront.STL)
2) Buildind side wall (GarageSideWall.STL)
3) Building back wall (GarageBack.STL)
4) Front wall design (GigaWallBuild.STL)

Optional parts for coloured walls:
1) Back wall colour (BackWallColourPatch.STL)
2) Side wall colour (SideWallColourPatch.STL)

Garage Door parts:
1) Garage door (GarageDoor2.STL)
2) Door guide (DoorGuide.STL)

Optional lock to keep the garage open (in Door Lock folder):
1) Hook (Hook2.STL)
2) Hook holder (HookThingFixed.STL)
3) Pin (Pin2.STL)

Car lift parts:

1) Lift base (CarLiftBase.STL & CarLiftBase-NoHoles.STL)
2) Lift pillar (CarLiftLegsSingleShorten.STL & CarLiftLegsSingleShortenDoveTail2.STL)
3) Lift pillar base/cap (PillarTop.STL)
4) Car lift pin (LockThing3.STL)

Alternate pillar cap for dove tail pillar:
1) Pillar cap (PillarTopCapDoveTail2.STL)

The following are optionals:

1) Garage storage (GarageBox2.STL)
2) Tyre rack (TyreRack.STL)

Print Settings

Nozzle size = 0.3 mm (Should be printable with 0.4)
Layer height = 0.2 mm

Filament change layer for colours on "GigaWallBuild":
1) Start (Overall wall colour, mine is in teal)
2) Layer 9 (Penguin inner face colour, mine is in white)
3) Layer 14 (Penguin body colour, mine is in grey)
4) Layer 19 (Lettering background, penguin head and eyes colour, mine is in black)
5) Layer 24 ("Giga's Garage" lettering colour, mine is in gold.

Filament change layer for colours on "FlatBase & FlatBase - No Holes":
1) Start (Outer area of the base and tiles gaps colour, mine is in black)
2) Layer 9 (Tiles of the flat base, mine is in white)

Assembly

Flat Base and Base

The car is tied by wires through the hole in the flat base

Flat base should fit nicely into the base, the tflat base should be glued or tape to the base. As for the alignment of the flat base to the base, see picture below.

Garage walls

Front wall will slide into the side wall gap and the back wall connected to the side wall with 3 round tabs. Back and side wall patch is just extras to split the wall into 2 colours.

Front wall design is glue or tape on to the front of the garage after the wall is built.

Door

Door guide will fit nicely into the square hole as indicated below.

Garage door will slide nicely in the guide, door lock is optional and it is glued or tape into the gap at the top of the front wall, see photos below.

Car lifts

Car lifts is built with 4 pillars, 2 variant of pillar available. Dove tail variant has a top cap that is secured using dove tail shape while the other is just a square hole.

Pillar cap is also used as pillar base for both variant of the pillar.

Lift base will slide nicely into through the pillar and it is held in position with the pin. Holes on the base is meant to secure the car placing on top of the base.

Extras

The wheels seen on the tyre racks in my photos are leftover/broken wheels I have from rim swapping cars.

Garage box is meant to fit into the right corner of the display.

If you are unsure on how to assemble them, please send me a message or leave a comment.

Others

Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.

I can be contacted through Instagram or Twitter too:

Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
Facebook: https://www.facebook.com/groups/1115757609295068/