This vehicle is based off of my Vamp model (https://www.thingiverse.com/thing:4930997) but with a more generic twist for customizing. Most parts are interchangeable between the two. This vehicle could be painted green or black for use with whatever faction you desire. I've removed the mini gun from the hood as well as the main gun so you can use the trunk area for a rack, or for seating (both versions of the the upper rear body included).
As with my Vamp, I recommend printing at 165% for use with the 6" GI Joe Classified figures. I print all my vehicles with no supports, only 5% infill and in PLA.
I have not test printed this version of the model but it is based off of a version I have printed many times. Please let me know ASAP if there are any assembly issues you identify.
| Axle_Cap_X4.stl | 9.3KB | |
| Axle_X2.stl | 449.2KB | |
| Battery.stl | 115.1KB | |
| Behind_Seats.stl | 1.4MB | |
| Center_Front.stl | 172.9KB | |
| Chassis.stl | 3.8MB | |
| Chassis_Front.stl | 3.3MB | |
| Chassis_Middle.stl | 223.1KB | |
| Chassis_Rear.stl | 45.3KB | |
| Dash.stl | 243.4KB | |
| Hitch.stl | 199.6KB | |
| Hood_Insert_X2.stl | 30.3KB | |
| Left_Fender.stl | 596.7KB | |
| Left_Front_Flare.stl | 161.4KB | |
| Left_Headlight_Cover.stl | 3.8KB | |
| Left_Inner_Fender.stl | 24.8KB | |
| Left_Rear_Flare.stl | 130.3KB | |
| Main_Body_Rear_Bottom.stl | 218.4KB | |
| Main_Body_Rear_Top.stl | 49.3KB | |
| Main_Body_Rear_Top_-_With_Seats.stl | 182.0KB | |
| Push_Bar.stl | 803.3KB | |
| Rear_Pan.stl | 311.7KB | |
| Right_Fender.stl | 605.8KB | |
| Right_Headlight_Cover.stl | 3.8KB | |
| Right_Rear_Flare.stl | 132.2KB | |
| Roll_Bar.stl | 848.2KB | |
| Roll_Bar_Alignment.stl | 402.4KB | |
| Roof.stl | 624.5KB | |
| Steering_Wheel.stl | 1.8MB | |
| Tail_Light.stl | 151.0KB | |
| Tail_Light_Lens.stl | 20.2KB | |
| Tire_X4.stl | 654.4KB | |
| Wheel_X4.stl | 278.7KB |
