Ghostbusters Ghost Trap (1984) 3D Printer Model
The file 'Ghostbusters Ghost Trap (1984) 3D Printer Model' is (stl,pdf,zip) file type, size is 7.3MB.
The file 'Ghostbusters Ghost Trap (1984) 3D Printer Model' is (stl,pdf,zip) file type, size is 7.3MB.
TRAP PRINT GUIDE
Looks like we can upload PDF again - Print Guide/List in with the files!
TRAP ARCHIVE.ZIP
This is for anyone who made a trap before Feb 2022 and needs to reprint old parts - included in download.
PARTS
Assembly hardware, greeblies, labels and Electronics Guide are available in my shop - https://charlesworthdynamics.etsy.com
ASSEMBLY GUIDES
All assembly guides other than Electronics Guide is available for free on my site.
http://bit.ly/3D_Kit_Instructions
Electronics Guide can be purchased from my shop: https://charlesworthdynamics.etsy.com
ASSEMBLY HARDWARE
A complete list of hardware needed for a Standard trap (fully 3D printed) is included in the Print Guide. You can also get all hardware and Deluxe upgrade parts directly from me: https://charlesworthdynamics.etsy.com
Trap Pedal is also available to print:
http://www.thingiverse.com/thing:1394639
Where I usually post updates and new items:
https://twitter.com/CworthDynamics
https://www.instagram.com/cworthdynamics
https://charlesworthdynamics.etsy.com
This Ghost Trap is over 55 parts designed to be fully 3D printed except for the screws that hold it all together. The trap can also accommodate electronics for lights, sound, door mechanics and smoke. The first two pictures show a Deluxe trap with as much real hardware as possible.
This is a hybrid between the GB1 & GB2 traps - overall size is GB2, the protruding cartridge is GB1.
While the trap is fully printable, it was designed based on real parts whenever possible so they can be swapped out as an upgrade. For example, 1/16" aluminum plates can be swapped out by using the 3D printed ones as a template.
To learn more about how the Trap was designed and built, see me on Tested.com:
| bottom_axle_x2_v2.stl | 65.5KB | |
| bottom_motor_mount-SMOKE.stl | 35.2KB | |
| bottom_plate_v3.stl | 406.0KB | |
| bottom_plate_v3_CUT_FRONT.stl | 365.2KB | |
| bottom_plate_v3_CUT_REAR.stl | 57.9KB | |
| bottom_wheel_chock_v2.stl | 15.9KB | |
| bottom_wheel_x4.stl | 65.7KB | |
| cube_1_inch.stl | 684.0B | |
| cube_20mm.stl | 684.0B | |
| foster_female_barb_x2.stl | 203.2KB | |
| foster_female_body_x2.stl | 564.5KB | |
| foster_male_base.stl | 51.5KB | |
| foster_male_body.stl | 148.5KB | |
| foster_male_insert_type_1.stl | 59.8KB | |
| foster_male_insert_type_2.stl | 52.8KB | |
| front_alum_plate_v2.stl | 39.2KB | |
| front_bargraph_insert.stl | 1.1KB | |
| front_bargraph_plate-LIP.stl | 74.5KB | |
| front_bargraph_plate-NO_LIP.stl | 50.0KB | |
| front_bottom_unit_v2.stl | 176.6KB | |
| front_top_unit_v9.stl | 533.2KB | |
| front_wing_LT_v3.stl | 46.7KB | |
| front_wing_RT_v3.stl | 46.7KB | |
| front_wire_clip_v5.stl | 67.9KB | |
| Ghost_Trap_Print_Guide_v16.pdf | 800.3KB | |
| handle.stl | 61.4KB | |
| handle_cap_metal_x2_v1.stl | 28.2KB | |
| handle_cap_x2.stl | 28.2KB | |
| handle_frame_v3.stl | 140.4KB | |
| knob-side_metal_knurl_GB2.stl | 2.4MB | |
| knob_front_ROUND_v2_x2.stl | 147.7KB | |
| knob_front_SQUARE_v2_x2.stl | 16.2KB | |
| knob_side_POST_v2_x2.stl | 35.2KB | |
| knob_side_skirted_v7.stl | 362.6KB | |
| rear_box-w-MAGNETS_v3.stl | 166.4KB | |
| rear_box-w-SCREWS_v2.stl | 187.0KB | |
| rear_box_LED_shade.stl | 75.1KB | |
| rear_box_toggle_switch.stl | 44.1KB | |
| rear_box_top_plate_FULL_LAMP_v1.stl | 47.2KB | |
| rear_box_top_plate_SHADE_ONLY_v1.stl | 77.5KB | |
| rear_frame_v3.1.stl | 88.9KB | |
| side_LT_alum_plate_LG-2_Hole_v2.stl | 52.2KB | |
| side_LT_alum_plate_LG-4_Hole_v2.stl | 59.7KB | |
| side_LT_alum_plate_SM_v2.stl | 22.7KB | |
| side_LT_panel_v2.stl | 168.9KB | |
| side_LT_panel_v2_CUT_FRONT.stl | 67.6KB | |
| side_LT_panel_v2_CUT_REAR.stl | 145.7KB | |
| side_LT_rod_FULL_x2-v2.stl | 36.2KB | |
| side_LT_rod_HALF_pin_x2.stl | 7.1KB | |
| side_LT_rod_HALF_v2_x4.stl | 39.5KB | |
| side_LT_upright_frame_v4.stl | 23.5KB | |
| Side_RT-Vector_Plate_GB1__GB3_v3.stl | 312.4KB | |
| Side_RT-Vector_Plate_GB2_v3.stl | 318.5KB | |
| side_RT_alum_plate_LG-2_Hole_v2.stl | 78.0KB | |
| side_RT_alum_plate_LG-4_Hole_v2.stl | 85.4KB | |
| side_RT_alum_plate_SM_v2.stl | 22.7KB | |
| side_RT_panel_COMBO_v3.stl | 214.3KB | |
| side_RT_panel_v3_CUT_FRONT.stl | 99.1KB | |
| side_RT_panel_v3_CUT_REAR.stl | 194.1KB | |
| side_RT_resistor_GB1__GB3_v2.stl | 165.3KB | |
| side_RT_resistor_GB2_v2.stl | 161.0KB | |
| side_RT_upright_frame_v4.stl | 72.7KB | |
| top_door_centered_SMOOTH_LT.stl | 44.3KB | |
| top_door_centered_SMOOTH_RT.stl | 44.9KB | |
| top_door_centered_STRIPES_LT.stl | 54.7KB | |
| top_door_centered_STRIPES_RT.stl | 53.6KB | |
| top_door_SMOOTH_LT.stl | 44.3KB | |
| top_door_SMOOTH_RT.stl | 44.9KB | |
| top_door_STRIPES_LT.stl | 53.3KB | |
| top_door_STRIPES_RT.stl | 54.3KB | |
| top_LED_holder_v2_x3.stl | 152.5KB | |
| top_plate_v7.stl | 520.9KB | |
| top_screen_clamp_x2.stl | 1.1KB | |
| top_screen_insert.stl | 684.0B | |
| Trap_Parts_ARCHIVE.zip | 3.8MB |
