Ghostbusters 2016 Proton Pack 3D Printer Model
The file 'Ghostbusters 2016 Proton Pack 3D Printer Model' is (stl) file type, size is 3.5MB.
The file 'Ghostbusters 2016 Proton Pack 3D Printer Model' is (stl) file type, size is 3.5MB.
Proton pack from the 2016 Ghostbusters
These pieces are not 100% accurate, just what I built with the info available when I built it last Halloween.
Here is a build log of my proton pack, including how I assembled the pack and programmed the arduino and neopixel ring lights: http://steakosaurus.com/?p=115
| angledBottomPiecePlate.stl | 8.7KB | |
| bottomCylinderStack.stl | 53.0KB | |
| bottomLightHolder.stl | 2.2KB | |
| bottomRingEigth.stl | 52.6KB | |
| bottomTimerReadout.stl | 3.8KB | |
| bottomTimerTopBase.stl | 1.1KB | |
| bottomWireBox.stl | 16.4KB | |
| bottomWireBoxKnob.stl | 7.9KB | |
| box2_1.stl | 12.6KB | |
| box2_2.stl | 15.9KB | |
| box3_1.stl | 239.2KB | |
| box3_2.stl | 23.0KB | |
| box3_3.stl | 15.0KB | |
| box4_1.stl | 44.2KB | |
| box4_2.stl | 16.2KB | |
| boxHandle.stl | 11.7KB | |
| buttonRed.stl | 78.5KB | |
| cageLeft1.stl | 1.6KB | |
| cageLeft2.stl | 1.1KB | |
| cageLeft3.stl | 1.6KB | |
| cageLeft4.stl | 1.1KB | |
| cageRight1.stl | 1.6KB | |
| cageRight2.stl | 1.1KB | |
| cageRight3.stl | 1.6KB | |
| cageRight4.stl | 1.1KB | |
| centerBracket.stl | 3.8KB | |
| circleBaseBL.stl | 84.8KB | |
| circleBaseBR.stl | 84.8KB | |
| circleBaseTL.stl | 88.3KB | |
| circleBaseTR.stl | 91.2KB | |
| cordHolder.stl | 23.8KB | |
| displayBottom.stl | 36.5KB | |
| displayTop.stl | 54.6KB | |
| frontMiddleStove.stl | 690.7KB | |
| frontOuterDisk.stl | 176.3KB | |
| frontOuterDiskLeft.stl | 93.4KB | |
| frontOuterDiskRight.stl | 93.4KB | |
| guageBoot.stl | 57.8KB | |
| gun_bodyBack.stl | 30.8KB | |
| gun_bodyFront.stl | 87.8KB | |
| gun_bodyMiddle.stl | 47.8KB | |
| gun_halfCordHolder.stl | 18.4KB | |
| gun_handle.stl | 539.1KB | |
| gun_nozzleStart.stl | 58.7KB | |
| gun_nozzleWithHoles.stl | 333.7KB | |
| gun_pipe2.stl | 32.7KB | |
| gun_smallPipe.stl | 27.4KB | |
| gun_stopper.stl | 29.8KB | |
| gun_tipExterior.stl | 114.9KB | |
| gun_tipInterior.stl | 117.3KB | |
| innerRingSixth.stl | 60.4KB | |
| lowHammondBox.stl | 13.6KB | |
| lowHammondBoxTall.stl | 13.6KB | |
| lowHammondCover.stl | 44.1KB | |
| lowPipeHolder.stl | 14.5KB | |
| metalPipeHolderTest.stl | 7.9KB | |
| middleHeatSink.stl | 112.6KB | |
| numberPlateBottom.stl | 36.5KB | |
| numberPlateLeft.stl | 54.6KB | |
| outerRingSixth.stl | 60.4KB | |
| pipeConnector.stl | 3.0KB | |
| pipeHolderSupport.stl | 684.0B | |
| pipeHolderTR.stl | 53.1KB | |
| spokeMiddleFifth.stl | 13.9KB | |
| topBox1.stl | 1.4KB | |
| topBox2_1.stl | 2.6KB | |
| topBox2_2.stl | 2.4KB | |
| topTabLeft.stl | 311.3KB | |
| topTabRight.stl | 596.2KB | |
| valveBottomTest.stl | 7.9KB | |
| valveHolder.stl | 22.2KB | |
| verticalCagePole.stl | 27.2KB | |
| warningLabel.stl | 7.9MB |
