Ghost Busters The Video Game Ghost Trap Additions/mods 3D Printer Model
The file 'Ghost Busters The Video Game Ghost Trap Additions/mods 3D Printer Model' is (STL) file type, size is 20.7MB.
The file 'Ghost Busters The Video Game Ghost Trap Additions/mods 3D Printer Model' is (STL) file type, size is 20.7MB.
Ghost Busters The Video Game Ghost trap additions/mods
Filter holder is made from these items:
Filter element is made from these items:
Slammer mushroom is made from these items:
Side screen is single print (Supports recommended), it has a lip to glue a transparent sheet on it
For ribbed hose - use 12mm ID electrical wiring harness or protective hose. Both slammer mushroom stem and side screen has bottom sides for this hoses
Filter holder uses black M3 socket cap screw (or similar american sized ones)
Could be combined with https://www.thingiverse.com/thing:1394492 for best results
Not included:
| filter_base.STL | 562.6KB | |
| Filter_holder_base.STL | 1.7MB | |
| Filter_holder_cap.STL | 633.9KB | |
| Filter_holder_plug.STL | 13.2MB | |
| Filter_holder_radiator_cap.STL | 580.2KB | |
| filter_mesh.STL | 1.1MB | |
| filter_top_cap.STL | 422.0KB | |
| side_counter_screen.STL | 14.4MB | |
| Slammer_mushroom_stem.STL | 16.4MB | |
| Slammer_mushroom_top_.STL | 7.1MB |
