The file 'Get Shifty! USB Sequential Gear Shifter, For Asetto Corsa, Dirt 3, All Racing Games! 3D Printer Model' is (stl,skp) file type, size is 957.1KB.
Hi there Folks! This is Shifty, my first larger project on thingiverse.
Shifty is a 2 position sequential gear shifter for rally and race simulators, dirt 3, assetto corsa, and others.
It uses an Arduino pro Micro as a HID input device. No coding is required! Super simple assembly.
Parts List:
3 x 45mm m3 bolts
2 x 70mm m8 bolts
4 x 20mm m2 self tapping wood screws
2 x m8 nuts
3 x m3 nuts
6 x m3 washer
4 x m2 washer
2 x 25mm x 5 x 5 springs (choose your own strength)
2 x Micro switch with roller (~15 x 25mm without contacts)
1 x Arduino pro micro, genuine or clone
small amount of wire.
3D parts list
1 x box
1 x cover
1 x handle
1 x stick
1 x foot
1 x handle
warning, this will ONLY FIT ON TABLES THINNER THAN 1.8 CM!
For the Arduino Pro Micro:
Solder the switches to pins 8, and 9, and obviously the other sides of the switch to ground.
Then use this short arduino sketch: http://puu.sh/vl936/cdfc35ba9d.ino
Feedback welcomed and encouraged.
| box.stl | 983.3KB | |
| cover.stl | 259.4KB | |
| foot.stl | 42.6KB | |
| handle.stl | 57.3KB | |
| knob.stl | 196.3KB | |
| project.skp | 1.9MB | |
| stick.stl | 55.3KB |
