Geprc Mark 5 parts.
Printed in TPU with 100% infill.
Use support where needed.
----- CREDITS -------------------------------------------------------------------------------------
The Camera mount/ears for O3 are not a remix, but I re-uploaded them to not lose track of them, as they fit perfectly. Same for the Crossfire mount. Sadly cannot find the original creator of the design anymore.
The dual SMA mount is a remix from NordFPV on printables. (https://www.printables.com/model/540322-geprc-mark5-gps-and-sma-mount)
| Cap_1000uf_12.5mm_Geprc_Mk5_v1.f3d | 108.7KB | |
| Cap_1000uf_12.5mm_Geprc_Mk5_v1.stl | 62.2KB | |
| Cap_470uf_10mm_Geprc_Mk5_v4.f3d | 143.5KB | |
| Cap_470uf_10mm_Geprc_Mk5_v4.stl | 55.7KB | |
| CRSF_holder_NEW.stl | 247.3KB | |
| Geprc_Mark_5_Caddx_Vista_3mm_Antenna_mount_v2.f3d | 499.9KB | |
| Geprc_Mark_5_Caddx_Vista_3mm_Antenna_mount_v2.stl | 642.1KB | |
| Geprc_Mark_5_Caddx_Vista_mount.stl | 46.4KB | |
| Geprc_Mark_5_Caddx_Vista_mount_-_USB_upside_down_v2.f3d | 243.1KB | |
| Geprc_Mark_5_Caddx_Vista_mount_-_USB_upside_down_v2.stl | 65.1KB | |
| Geprc_Mark_5_Caddx_Vista_mount_-_USB_upside_down_v2_-_TALLER.f3d | 261.8KB | |
| Geprc_Mark_5_Caddx_Vista_mount_-_USB_upside_down_v2_-_TALLER.stl | 63.2KB | |
| Geprc_mark_5_DC_gopro_Mount_solid.f3d | 1.5MB | |
| Geprc_mark_5_DC_gopro_Mount_solid.stl | 172.7KB | |
| Geprc_Mark_5_dual_SMA_mount.stl | 188.5KB | |
| Geprc_Mark_5_OG_Air_Uni_mount.f3d | 996.0KB | |
| Geprc_Mark_5_OG_Air_Uni_mount.stl | 427.8KB | |
| GPS-Gopro_Holder_v1_MEDIUM.stl | 281.2KB | |
| GPS-Gopro_Holder_v1_SHORTER.stl | 304.3KB | |
| GPS-Gopro_Holder_v1_TALLER.stl | 274.0KB | |
| GPS-Gopro_Holder_v2.f3d | 1.1MB | |
| Mark5_O3_camera.stl | 209.5KB | |
| Standoff_to_cap_holder_10mm.f3d | 111.0KB | |
| Standoff_to_cap_holder_10mm.stl | 94.1KB |
