Tool with PET holder and magnet
I made this tool for a DX-Wire rod. The diameter of the in this case used second segment is 11,6mm so I made the hole with 12mm diameter. You need 2 screwes M6 with nuts, it holds very good without force, you need to tighten the screws very smoothly. It will fit for other pole fishing rods with the same diameter.
The magnet is a small one with M4 thread.
Printed with 80% infill grid.
| spiderbeam_GC_tools_Version_12mm_Basty_v1.stl | 150.4KB |
