This is an Accurate Model of the Mistsplitter Reforged Sword from Genshin Impact.
It is almost exactly 1 Meter long (1014mm). It is not designed to be swung around a lot, its more a decorative piece.
The Files include:
-A print ready cut Version for a 220 x 220 mm Build Plate (e.g. Ender 3).
-A printable Wall mounting System
Find a Less cut version on:
https://cults3d.com/de/modell-3d/kunst/genshin-impact-mistsplitter-reforged-a9df912a4eef23976da0
Depending on your Layer hight you will need to do a lot of Sanding. Especially on the Blade the layers can be very visible.
Use some kind of filler on the connections between the top and bottom pieces. I did not and you can see the groove on the Pictures. This also applies to the cut Blade and Guard.
It is held together by printed connection pieces.
The only thing needed to assemble is Glue and some clamps.
| BladeBaseBottom.stl | 30.6KB | |
| BladeBaseTop.stl | 30.6KB | |
| BladeConnectionPiceBase.stl | 684.0B | |
| BladeConnectionPiceTip.stl | 684.0B | |
| BladeDetail_1_Bottom.stl | 84.5KB | |
| BladeDetail_1_Top.stl | 237.1KB | |
| BladeDetail_2_Bottom.stl | 70.1KB | |
| BladeDetail_2_Top.stl | 367.2KB | |
| BladeDetail_3_Bottom.stl | 90.7KB | |
| BladeDetail_3_Top.stl | 88.7KB | |
| BladeMiddleBottom.stl | 12.0KB | |
| BladeMiddleTop.stl | 12.0KB | |
| BladeMount.stl | 80.8KB | |
| BladeTipBottom.stl | 67.6KB | |
| BladeTipTop.stl | 67.6KB | |
| GuardBaseBottom.stl | 736.2KB | |
| GuardBaseTop.stl | 736.2KB | |
| GuardConnectionPice.stl | 684.0B | |
| GuardDetail_1_Bottom.stl | 384.3KB | |
| GuardDetail_1_Top.stl | 384.8KB | |
| GuardDetail_2_Bottom.stl | 279.6KB | |
| GuardDetail_2_Top.stl | 281.5KB | |
| GuardDetail_3_Bottom.stl | 849.9KB | |
| GuardDetail_3_Top.stl | 849.9KB | |
| GuardTipBottom.stl | 25.6KB | |
| GuardTipTop.stl | 27.3KB | |
| HandleBottom.stl | 983.0KB | |
| HandleEndBottom.stl | 259.5KB | |
| HandleEndTop.stl | 259.5KB | |
| HandleMount.stl | 97.7KB | |
| HandleRingBottom.stl | 252.9KB | |
| HandleRingTop.stl | 252.9KB | |
| HandleTop.stl | 990.8KB |
