This is the Gengar Pokemon figure sliced by parts. Also, I uploaded a full model, but I didn't try to print it like this. For the mouth, legs, and hands, you will need some supports. Other parts you can print without it. I printed it with 0.16 resolution. Keep in mind, that you will need a model, named “connector” 6 times, and 2 pupils
Tip for the assembling. Take the back first, then connect the legs and arms to it and after that, you can cover it with the front part. You will need glue.
| body.stl | 499.5KB | |
| connector.stl | 93.1KB | |
| ears.stl | 37.8KB | |
| eyes.stl | 68.5KB | |
| Gengar_one_model.stl | 925.6KB | |
| hands.stl | 205.4KB | |
| legs.stl | 142.3KB | |
| mouth.stl | 19.7KB | |
| pupils.stl | 7.7KB |
![[UPDATE] Tabletop Plant: “Rock Claw 1” (Alien Vegetation 18) 3D Printer Model](https://res.3axis.co/6ae42bf7-4da7-4530-b60f-eb980a620628/images/02d24bb7-02e4-43ef-81a1-e0bf6553cc3c_thumb.jpg)
