Genetic Fractal Lamp 3D Printer Model
The file 'Genetic Fractal Lamp 3D Printer Model' is (stl) file type, size is 895.2KB.
The file 'Genetic Fractal Lamp 3D Printer Model' is (stl) file type, size is 895.2KB.
I've been developing algorithms for genetic fractals for the last decade and this project served as a test drive of my new 3D Printer (Creality CR10 Mini).
The 12 leaves are printed separately and inserted in the lamp base.
The lamp base is design to take an E14 fitting which fits directly into the lamp base on a rim inside the base. Refer photo above for the type of fitting. Please see the IMPORTANT notes below.
I used a remote controlled colour E14 led bulb which lights the lamp up beautifully at night. Lots of lovely colours :)
Enjoy.
===================================================================
IMPORTANT: ONLY USE LOW POWER LED LIGHT BULBS IN THIS LAMP!!!
If you use incandescent or other types of lamp you will probably melt the lamp and possibly start a fire.
IMPORTANT: WHEN INSTALLING THE LAMP FITTING, BE CAREFUL WITH THE WIRING. YOU WILL BE PLUGGING THIS INTO A MAINS OUTLET AND NEED TO KNOW THE RISKS OF ELECTRIC SHOCK.
If you have no experience with electricity, then this project is probably not for you.
YOU BUILD THIS LAMP AT YOUR OWN RISK. I TAKE NO RESPONSIBILITY FOR YOUR ACTIONS.
| lamp_base.stl | 876.7KB | |
| lamp_leaves.stl | 2.4MB |
