STL files for a two axis camera gimbal. Uses a micro servo and a regular servo. I have mounted this on a DJI F550 with landing gear.
You will need :
8 x M3 / 20mm phillips head nuts and bolts
2 x M4 / 15mm nut and bolt for mounting to quad.
Micro servo ( I had a spare metal gear servo, China branded one)
Regular servo ( Again, had a spare so used it)
Some glue for securing everything!
I directly mounted the servos without servo horns using some glue, however if you would like to use standard servo horns I am sure the design would be easily modified.
If there is enough interest i'll put up a video as to how it performs, very simple to build once printed. I used PLA, printed 0.2 layer thickness on a printrbot Jr.
It might need a bit of tweaking, but I think it is a good basis to build from. Attached to my F550 first attempt. Using it with a KK2 board from hobby king.
| v1f550mount_fixed.stl | 43.7KB | |
| V1gimbalbase_fixed.stl | 62.4KB | |
| V1_gimbal_base.stl | 174.6KB | |
| v2gimbalservoarmuntitled_fixed.stl | 61.3KB | |
| v2tiltservo.stl | 98.8KB |
