Gem Generator 3D Printer Model Free Download

Description Files (33)

Summary

Generate cartoon-styled gemstones with our latest, free, 3D printable design.

This simple customizable design allows you to choose the number of sides, dimensions and proportions of your gemstones.

This design is completely free and shared under a permissive license. Your support is hugely appreciated.

Did you know?

Some of our designs cannot be found on Thingiverse. If you are looking for more, check out our premium projects:

https://codeandmake.com/premium

OpenSCAD Customizer Options

We recommend you use OpenSCAD to customize this design.

This design has the following Customizer options:

General

Diameter - Diameter at widest point
Sides - Number of sides

Bottom

Bottom_Height - Uncut height of bottom section
Bottom_Cutoff_Percent - Percentage to cut from bottom section

Middle

Middle_Height - Height of middle section

Top

Top_Height - Uncut height of top section
Top_Cutoff_Percent - Percentage to cut from top section

Printing

Orientation - Rotate onto face for easier printing

Preview

Show_Uncut_Ends - Show uncut ends in preview mode

Design Considerations

In many cases, it should be possible to print designs without supports. For the best results, consider the angle of overhangs and use the Orientation option.

Material

This design is perfect for printing in most filaments, but we recommend translucent filaments/resins in particular for this design.

Versions

1.1 (29 Jan 2022)
- Added Customizer tabs
- Increased max Sides to 12
- Added option for middle section (Middle_Height)
- Added Show_Uncut_Ends preview option
- Updated Orientation options:
  - Renamed Side to Bottom Side
  - Added new Side option
  - Added Top Side option
1.0 (28 Jan 2022) - Initial version

Printing

Recommended slicer settings:

Resolution: 0.1mm - 0.2mm
Infill: ~10 - 20% recommended.
Supports: Should not be required for most designs, but designs with significant overhangs will require supports.
Rafts: Not required, unless you experience adhesion issues.

License

The "Gem Generator" models (.stl) are licensed under the CC BY license by Code and Make.

The "Gem Generator" code (.scad) is licensed under The MIT License by Code and Make.

Note: 'BSD' license has been selected as it is the closest available option in the list.

We are proud to offer content to you absolutely free.

We love to create free content for you. As you might imagine, it takes a lot of time. Supporters help us fund materials and equipment to create future projects and tutorials. To show your appreciation, please use the link below:

https://codeandmake.com/support

We thank you so much for your support!

codeandmake.com_Gem_Generator_v1.1.scad	4.8KB
codeandmake.com_Gem_Generator_v1.1_-_Eight-Sided_Long_Sample_Bottom_Side.stl	1.6KB
codeandmake.com_Gem_Generator_v1.1_-_Eight-Sided_Long_Sample_Side.stl	1.6KB
codeandmake.com_Gem_Generator_v1.1_-_Eight-Sided_Sample_Bottom_Side.stl	1.5KB
codeandmake.com_Gem_Generator_v1.1_-_Eight-Sided_Sample_Top_Side.stl	1.5KB
codeandmake.com_Gem_Generator_v1.1_-_Eight-Sided_Sample_Upright.stl	1.5KB
codeandmake.com_Gem_Generator_v1.1_-_Eight-Sided_Sample_Upsidedown.stl	1.5KB
codeandmake.com_Gem_Generator_v1.1_-_Eight-Sided_Small_Sample_Bottom_Side.stl	3.0KB
codeandmake.com_Gem_Generator_v1.1_-_Eight-Sided_Small_Sample_Upright.stl	3.0KB
codeandmake.com_Gem_Generator_v1.1_-_Five-Sided_Long_Sample_Bottom_Side.stl	1.1KB
codeandmake.com_Gem_Generator_v1.1_-_Five-Sided_Long_Sample_Side.stl	1.1KB
codeandmake.com_Gem_Generator_v1.1_-_Five-Sided_Sample_Bottom_Side.stl	984.0B
codeandmake.com_Gem_Generator_v1.1_-_Five-Sided_Sample_Top_Side.stl	984.0B
codeandmake.com_Gem_Generator_v1.1_-_Five-Sided_Sample_Upright.stl	984.0B
codeandmake.com_Gem_Generator_v1.1_-_Five-Sided_Sample_Upsidedown.stl	984.0B
codeandmake.com_Gem_Generator_v1.1_-_Five-Sided_Small_Sample_Bottom_Side.stl	1.8KB
codeandmake.com_Gem_Generator_v1.1_-_Five-Sided_Small_Sample_Upright.stl	1.8KB
codeandmake.com_Gem_Generator_v1.1_-_Four-Sided_Long_Sample_Bottom_Side.stl	884.0B
codeandmake.com_Gem_Generator_v1.1_-_Four-Sided_Long_Sample_Side.stl	884.0B
codeandmake.com_Gem_Generator_v1.1_-_Four-Sided_Sample_Bottom_Side.stl	784.0B
codeandmake.com_Gem_Generator_v1.1_-_Four-Sided_Sample_Top_Side.stl	784.0B
codeandmake.com_Gem_Generator_v1.1_-_Four-Sided_Sample_Upright.stl	784.0B
codeandmake.com_Gem_Generator_v1.1_-_Four-Sided_Sample_Upsidedown.stl	784.0B
codeandmake.com_Gem_Generator_v1.1_-_Four-Sided_Small_Sample_Bottom_Side.stl	1.4KB
codeandmake.com_Gem_Generator_v1.1_-_Four-Sided_Small_Sample_Upright.stl	1.4KB
codeandmake.com_Gem_Generator_v1.1_-_Six-Sided_Long_Sample_Bottom_Side.stl	1.3KB
codeandmake.com_Gem_Generator_v1.1_-_Six-Sided_Long_Sample_Side.stl	1.3KB
codeandmake.com_Gem_Generator_v1.1_-_Six-Sided_Sample_Bottom_Side.stl	1.2KB
codeandmake.com_Gem_Generator_v1.1_-_Six-Sided_Sample_Top_Side.stl	1.2KB
codeandmake.com_Gem_Generator_v1.1_-_Six-Sided_Sample_Upright.stl	1.2KB
codeandmake.com_Gem_Generator_v1.1_-_Six-Sided_Sample_Upsidedown.stl	1.2KB
codeandmake.com_Gem_Generator_v1.1_-_Six-Sided_Small_Sample_Bottom_Side.stl	2.2KB
codeandmake.com_Gem_Generator_v1.1_-_Six-Sided_Small_Sample_Upright.stl	2.2KB