Geeetech Mizar S Front Camera Mount With Thumb Screw Support 3D Printer Model
The file 'Geeetech Mizar S Front Camera Mount With Thumb Screw Support 3D Printer Model' is (3mf,stl) file type, size is 224.5KB.
The file 'Geeetech Mizar S Front Camera Mount With Thumb Screw Support 3D Printer Model' is (3mf,stl) file type, size is 224.5KB.
Front camera mount for the Mizar S, just loosen the two screws in the front, and slide the mount over them they have washers back out screws far enough to avoid them, then tighten the screws back down.
I made this to work with a cheap webcam I bought off Amazon, the cut out is for the monitor grabber on the camera.
I would not extended the platform any further, even if you pull the build plate forward till it stops the only thing that bump the camera is the grabbing edge which you can just turn to the back.
| Cam_Bracket_V3.3mf | 133.0KB | |
| Cam_Bracket_V3.stl | 508.4KB |
