Geeetech 3D-touch V3.2 Pro Bracket For A Voxelab Aquila S2 3D Printer Model
The file 'Geeetech 3D-touch V3.2 Pro Bracket For A Voxelab Aquila S2 3D Printer Model' is (stl) file type, size is 13.3KB.
The file 'Geeetech 3D-touch V3.2 Pro Bracket For A Voxelab Aquila S2 3D Printer Model' is (stl) file type, size is 13.3KB.
I used the source model and the STL file from here https://cults3d.com/en/3d-model/tool/geeetech-3dtouch-v3-2-v3-2-pro-mount to create this bracket. I have the model oriented in the recommended way to print it. I am using the printsleo3d aquila S2 firmware and it works fine with the black and white colored geeetech 3D Touch V3.2 Pro sensor.
ON my setup the z-offset had to be set to -3.55 to get the optimal amount of squish from the print nozzle and textured PEI print bed.
I currently do not have a picture of the printed model installed on my S2 as it's currently running a 13-hour print, but I will add one soon to show how it looks on the print head.
| aquila-s2-geeetech-3d-touch-v3.2-V2.stl | 55.5KB |
