Gecko Magnetic Holster Mount 3D Printer Model
The file 'Gecko Magnetic Holster Mount 3D Printer Model' is (stl) file type, size is 173.8KB.
The file 'Gecko Magnetic Holster Mount 3D Printer Model' is (stl) file type, size is 173.8KB.
This is a mounting solution I created to mount magnets to the side of my Gecko in order to make it compatible with "Lotus System" magnetic holster plates.
The magnets are mounted at an angle in order to maximize the strength of the part by having the layers perpendicular to the bolt holes.
This mount is compatible with the "Lotus System" plates sold by MagAtTac:
https://www.etsy.com/shop/MagAtTac
To assemble your mount you'll need:
2x M5x17mm "SNAP MALE BOLT, size L" Fidlock/Lotus/Holdster magnets.
2x M5 hex nut
3x M3x20mm screws
3x M3 brass inserts (any style that is ~5mm in height should work though I haven't tested all different types of inserts)
I'm also including an earlier version that is non angled as some people had requested it during testing. I believe that this non angled version will be weaker due to some less than optimal layer orientation near the magnets/M5 nuts.
If you would like to purchase the files for the Gecko you can do so here:
https://www.etsy.com/ca/listing/957928696/the-gecko-3d-printed-foam-dart-blasting?ref=shop_home_active_1&crt=1
If you would rather buy a pre-built Gecko please check the list of authorized distributors in the Etsy listing's description!
| angledMagnetMount.stl | 62.8KB | |
| nonMagnetSide.stl | 39.1KB | |
| olderVersion_nonAngledMount.stl | 305.3KB |
