Geared Fidget Spinner 3D Printer Model
The file 'Geared Fidget Spinner 3D Printer Model' is (stl) file type, size is 2.5MB.
The file 'Geared Fidget Spinner 3D Printer Model' is (stl) file type, size is 2.5MB.
Gears can be spun independently from the center cap (spinning the fidget spinner doesn't spin the gears). Gears will need to be printed at 100% infill for weight. Center pin is slightly longer than the outer pins. I highly suggest coating all contact surfaces (spacers, center caps) with graphite to lower friction. DO NOT print with PETG as the gears like to lock up due to static buildup. I find silk PLA and matte PLA to work best as they seem to have a lower friction coefficient. Parts will need to be glued together. 4 different frames are included. If noise is an issue then I suggest printing the spiral gears as they are much quieter. There are 2 separate spiral gear files because the teeth of each curve in opposite directions.
PRINT COUNT
A: 1
B: 2
C: 2
D: 4 (1 center gear and 3 outer gears)
E: 3
F: 6
G: 8
| A_Center_Pin.stl | 78.2KB | |
| B_Center_Pin_Cap.stl | 1.6MB | |
| C_Frame_1.stl | 263.9KB | |
| C_Frame_2.stl | 500.9KB | |
| C_Frame_3.stl | 580.0KB | |
| C_Frame_4.stl | 573.5KB | |
| D_Center_Gear_Spiral.stl | 501.6KB | |
| D_Gear.stl | 145.4KB | |
| D_Outer_Gear_Spiral.stl | 501.6KB | |
| E_Outer_Pin.stl | 78.2KB | |
| F_Outer_Pin_Cover.stl | 1.5MB | |
| G_Spacer.stl | 117.3KB |
