GEARED Egg Bot 3D Printer Model
The file 'GEARED Egg Bot 3D Printer Model' is (stl) file type, size is 908.3KB.
The file 'GEARED Egg Bot 3D Printer Model' is (stl) file type, size is 908.3KB.
This is a geared version of an egg bot.
The gear allows for better resolution on the y-axis.
This project uses NEMA 14 instead of NEMA 17 stepper motors.
Running system with a Melzi Reprap board I had left over using a modifed merlin firmware.
Using a modified unicorn inkscape plugin.
Note: Several Parts require you to pause during printing and drop in a nut (M4 or 5/16)
UPDATE:
For those that want to use a reprap style board such as the Melzi board see the following locations for help with the software.
firmware for the board https://github.com/aziobro/Marlin-for-Huxley-MarlinFirmware-
Modified version of the marker-bot unicorn inkscape plugin. https://github.com/aziobro/inkscape-unicorn
Video in Action on a golf ball. https://www.youtube.com/watch?v=H1hxpNOu-wU
| EggbotYGear.stl | 3.0MB | |
| EggbotYSteppergear.stl | 787.5KB | |
| egg_bot_ziobro_-_back_plate_for_geared_mount.stl | 84.7KB | |
| egg_bot_ziobro_-_drivemotorcup.stl | 60.2KB | |
| egg_bot_ziobro_-_Eggideler.stl | 52.6KB | |
| egg_bot_ziobro_-_foot.stl | 47.5KB | |
| egg_bot_ziobro_-_GearedYbearing.stl | 241.8KB | |
| egg_bot_ziobro_-_GearedYPlate.stl | 176.3KB | |
| egg_bot_ziobro_-_GearedYPlate_2.stl | 216.2KB | |
| egg_bot_ziobro_-_gear_plate_mount_1.stl | 185.9KB | |
| egg_bot_ziobro_-_MotorMountV2.stl | 104.0KB | |
| egg_bot_ziobro_-_Tail_Mount_V2.stl | 74.2KB | |
| egg_bot_ziobro_-_thumb_nut.stl | 391.0KB | |
| Pen_Arm_Top_v5.stl | 335.6KB | |
| spring_v2.stl | 124.4KB |
