Geared Business Card Holder 3D Printer Model
The file 'Geared Business Card Holder 3D Printer Model' is (stl) file type, size is 1.7MB.
The file 'Geared Business Card Holder 3D Printer Model' is (stl) file type, size is 1.7MB.
Feel free to add your own text or logo at the top of the case.
.
Printed on a Prusa i3 in PLA, 0.2mm layers, 50mm/s, all at once.
.
The gears had to be cleaned slightly, and several parts had to be welded together via soldering iron. Look at the assembled version for assistance - it is pretty straight forward.
.
Only 2 gears are welded - the exposed small gears on each side. All other gears simply spin in place.
.
Proof of operation:
https://www.youtube.com/watch?v=hP6F9nGMdII&feature=youtu.be
| GBC_Assembled.stl | 2.0MB | |
| GBC_bottom_plate.stl | 67.0KB | |
| GBC_center_gear.stl | 347.5KB | |
| GBC_Full_Plate.stl | 2.0MB | |
| GBC_gearx3stl.stl | 81.2KB | |
| GBC_gear_case_L.stl | 88.9KB | |
| GBC_gear_case_Large.stl | 45.2KB | |
| GBC_gear_case_R.stl | 93.5KB | |
| GBC_gear_case_U.stl | 84.6KB | |
| GBC_gear_shaft_x_2stl.stl | 113.9KB | |
| GBC_top_plate.stl | 817.2KB |
