Gearbox Keychain Remix 3D Printer Model
The file 'Gearbox Keychain Remix 3D Printer Model' is (stl) file type, size is 54.7 MB.
The file 'Gearbox Keychain Remix 3D Printer Model' is (stl) file type, size is 54.7 MB.
made a complete redesign with this Remix. Goal was to excange the printed and fast breaking clips with a (metric) Screw to fix the wheels to the base. You Need one M3x8mm Screw for every gear.
gear design is "very close" to metric gears with modul 1.
i´ve printed the first ones with 0.5mm nozzle, should better be done with a 0.25mm nozzle...
will upload a few more bases soon... :)
Thanks to Umake for the Inspiration!
UPDATE
=======
added a upside-down Version of the gears to get the glossy side up when printing abs directly on glass. this ones have the hole closed with a 0.5mm thin wall to make em printable without support. the wall needs to get drilled after printing...
added:
base for Z20-Z40
two Z40 gears with one or two grooves
Z20, Z30 and Z40 gears with a knob (thanks to Bobovich)
‘halter_five_4xZ14_1xZ20.stl’
added:
triple_opend_Z20-30-40_complete
duo_opend_Z20-40_complete.stl
duo_opend_Z14-20_complete.stl
five_opend_4xZ14_1xZ20.stl
PLZ add pics if you made one. :)
| duo_opend_Z14-20_complete.stl |
| duo_opend_Z20-40_complete.stl |
| five_opend_4xZ14_1xZ20.stl |
| halter_duo_Z14-20.stl |
| halter_duo_Z20-40.stl |
| halter_five_4xZ14_1xZ20.stl |
| halter_triple_Z14-20-20.stl |
| halter_triple_Z14-20-20_side_open.stl |
| halter_triple_Z20-30-40.stl |
| modul1_z14.stl |
| modul1_Z14_upsidedown.stl |
| modul1_z20.stl |
| modul1_z20_knob.stl |
| modul1_Z20_upsidedown.stl |
| modul1_z30.stl |
| modul1_z30_knob.stl |
| modul1_Z30_upsidedown.stl |
| modul1_z40.stl |
| modul1_z40_grooved.stl |
| modul1_z40_knob.stl |
| modul1_Z40_upsidedown.stl |
| triple_opend_Z20-30-40_complete.stl |
