a set of gears module 1.5 good engagement proper involution
12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 tooth
shaft diameter 6 mm
height 12 mm
to change the height without changing the profile of the gear tooth, you need to enable free Z-axis scaling in Cura or any other printing program.
if you need module 2 and others - subscribe so as not to miss updates
I hope this helps in your design
| m1.5_12t.STL | 42.6KB | |
| m1.5_13t.STL | 45.5KB | |
| m1.5_14t.STL | 43.0KB | |
| m1.5_15t.STL | 45.5KB | |
| m1.5_16t.STL | 48.0KB | |
| m1.5_17t.STL | 50.6KB | |
| m1.5_18t.STL | 46.1KB | |
| m1.5_19t.STL | 48.2KB | |
| m1.5_20t.STL | 46.5KB | |
| m1.5_21t.STL | 48.4KB | |
| m1.5_22t.STL | 50.4KB | |
| m1.5_23t.STL | 52.3KB | |
| m1.5_24t.STL | 44.9KB | |
| m1.5_25t.STL | 46.5KB | |
| m1.5_26t.STL | 48.0KB | |
| m1.5_27t.STL | 49.6KB | |
| m1.5_28t.STL | 51.2KB | |
| m1.5_29t.STL | 52.7KB | |
| m1.5_30t.STL | 54.3KB |
