This is a library of small, matching gears intended for 3D ABS extrusion printing, I use these to make my own gear boxes.
I needed gears for some of my projects and eventually wound up creating this set, which I've dubbed "Gear Set 1", and created a reference chart to aid in the pairing of its gears.
| Gear_Set_1.zip | 17.1MB | |
| Gear_Set_1_-__Specs.pdf | 80.1KB | |
| GS1_-_12_tooth.dwg | 389.7KB | |
| GS1_-_12_tooth.stl | 128.6KB | |
| GS1_-_16_tooth.dwg | 691.5KB | |
| GS1_-_16_tooth.stl | 299.9KB | |
| GS1_-_24_tooth.dwg | 634.4KB | |
| GS1_-_24_tooth.stl | 240.3KB | |
| GS1_-_32-64_tooth.dwg | 1.5MB | |
| GS1_-_32-64_tooth.stl | 963.3KB | |
| GS1_-_32_tooth.dwg | 655.6KB | |
| GS1_-_32_tooth.stl | 390.9KB | |
| GS1_-_40__tooth.dwg | 758.3KB | |
| GS1_-_40__tooth.stl | 304.2KB | |
| GS1_-_48__tooth.dwg | 888.1KB | |
| GS1_-_48__tooth.stl | 359.5KB | |
| GS1_-_56__tooth.dwg | 1009.4KB | |
| GS1_-_56__tooth.stl | 413.6KB | |
| GS1_-_64_tooth.dwg | 844.4KB | |
| GS1_-_64_tooth.stl | 462.6KB | |
| GS1_-_72_tooth.dwg | 1.2MB | |
| GS1_-_72_tooth.stl | 532.7KB | |
| GS1_-_8-48_tooth.dwg | 1.4MB | |
| GS1_-_8-48_tooth.stl | 570.4KB | |
| GS1_-_8-64_tooth.dwg | 2.3MB | |
| GS1_-_8-64_tooth.stl | 643.8KB | |
| GS1_-_80_tooth.dwg | 1.4MB | |
| GS1_-_80_tooth.stl | 608.4KB | |
| GS1_-_8_tooth.dwg | 296.6KB | |
| GS1_-_8_tooth.stl | 96.4KB |
![Specimens With Gauge Length Five Times The Diameter [E8M] 3D Printer Model](https://cdn.3axis.co/assets/ae/bc/cf/35/aebccf35-03cd-4da1-992f-62420a3495a2/images/75f1d63f-1551-4a64-a171-fb8c6ea0e55e_thumb.jpg)
