Gear Loot Chest 3D Printer Model
The file 'Gear Loot Chest 3D Printer Model' is (stl,3mf) file type, size is 5.4MB.
The file 'Gear Loot Chest 3D Printer Model' is (stl,3mf) file type, size is 5.4MB.
Cool little decorative geared chest for storing your most precious loot.
Printing
No supports needed. Print the lid pieces the geared faces down.
Assembly
You need 4 M3x14 bolts and nuts for the lid hinges if you use the knobs. If you leave the knobs out, M3x12 should be long enough.
Glue the lid halves together using the pins, put some glue on the knobs and screw them in the hinge holes. There are holes on the inside to hold the nuts.
If you don't like the knobs for opening the lid, you can leave them out. You can still easily open the chest pulling from the sides.
| Gear_Chest_-_Body_V1.1.stl | 3.5MB | |
| Gear_Chest_-_Knurled_Knob.stl | 773.3KB | |
| Gear_Chest_-_Knurled_Knob_2.stl | 768.3KB | |
| Gear_Chest_-_Knurled_Knob_3.stl | 768.3KB | |
| Gear_Chest_-_Knurled_Knob_4.stl | 773.3KB | |
| Gear_Chest_-_Lid_1_A.stl | 326.3KB | |
| Gear_Chest_-_Lid_1_B.stl | 326.9KB | |
| Gear_Chest_-_Lid_2_A.stl | 331.4KB | |
| Gear_Chest_-_Lid_2_B.stl | 334.0KB | |
| Gear_Chest_-_Lid_Pin.stl | 684.0B | |
| Gear_Chest_-_Lid_Pin_2.stl | 684.0B | |
| Gear_Loot_Chest_V1.1.3mf | 2.8MB |
