Gear Fidget Toy 05 – The Flat Hexagon With A Spin 3D Printer Model
The file 'Gear Fidget Toy 05 – The Flat Hexagon With A Spin 3D Printer Model' is (stl) file type, size is 2.7MB.
The file 'Gear Fidget Toy 05 – The Flat Hexagon With A Spin 3D Printer Model' is (stl) file type, size is 2.7MB.
I ran out of fidget toys i really enjoy. An obviously highly critical situation!
That's why i started to design my own ones, which resulted in a series of five similar but still quite different fidget toys using helical gears.
(Thingiverse has f'd up the formatting, so that's the best i could do, sorry)
Gear Fidget Toy 01 - The big square
https://www.thingiverse.com/thing:4567422
Gear Fidget Toy 02 - The thin square
https://www.thingiverse.com/thing:4567463
Gear Fidget Toy 03 - The hexagon
https://www.thingiverse.com/thing:4567480
Gear Fidget Toy 04 - The little square with a spin
https://www.thingiverse.com/thing:4567499
Gear Fidget Toy 05 - The flat hexagon with a spin (my favourite)
As i designed it with quite small tolerances to not have the gears too tight ore loose, i don't recommend to resize them.
Be careful with the amount of glue when assembling the top and bottom parts.
Use a short piece of 1.75mm filament to align the knobs to the middle gear when glueing them together.
| Gear_Fidget_Toy_05_-_Bottom.stl | 405.2KB | |
| Gear_Fidget_Toy_05_-_Gear.stl | 3.3MB | |
| Gear_Fidget_Toy_05_-_Knob.stl | 917.8KB | |
| Gear_Fidget_Toy_05_-_Middle_Gear.stl | 2.2MB | |
| Gear_Fidget_Toy_05_-_Top.stl | 354.8KB |
