The file 'GBot Tiny (HBot With 120x120mm Printbed) 3D Printer Model' is (DXF,STL,stl,rar,dxf) file type, size is 10.5MB.
Hello, this is my implementation of HBot printer - GBot Tiny. This printer has small printbed but that's enough almost for every thing I've printed.
Later I will add BOM and instruction how to build one.
For now:
• mgn12 rail 200mm x2
• mgn12 rail 180mm x1
• vslot 240mm x4
• vslot 200mm x4
• GT2 belt 2m
• DFRobot encoder as endstop x3 ( https://www.dfrobot.com/product-98.html )
• Extruder TT x1 ( https://ru.aliexpress.com/item/32848902822.html )
• 608 bearing x1
• lm8luu bearing x2
• lead screw 250mm x1
• heat bed 120x120mm x1 ( https://ru.aliexpress.com/item/32822376162.html )
Turbo fan 4010: http://got.by/5m2ftc
Backlight (cold waterproof): http://got.by/5m2g1i
ws2812 (for future mods): http://got.by/5m2g8p или http://got.by/5mfsvx
Sensor button: http://got.by/5m2gm4
MOSFET IRF3205: http://got.by/5mfryv
MOSFET IRFZ44n: http://got.by/5mfsgy
Wire (24awg): http://got.by/5m2gsj
Direct Titan от Trianglelab: http://got.by/5m2hkj
DirectBIQU H2: http://got.by/5m2hqk
Printbed 180х180мм: http://got.by/5m2hu2
Buttons http://got.by/5hj6t9
Mini12864 Panel http://got.by/5hj6v7 (B)
Mini12864 Panel BTT http://got.by/5hj781
Bearings 688z http://got.by/5hj7eg
Printbed 120x120 http://got.by/5hj7px
Motherboard MKS Gen V1.4 http://got.by/5hj7tm
Power supply MW LRS 150 http://got.by/5hj7ul
| backPlate.DXF | 33.6KB | |
| bedKnob.STL | 181.0KB | |
| bedMount.DXF | 35.0KB | |
| bedMount.STL | 282.1KB | |
| bedMount_BN.STL | 41.5KB | |
| bedMount_BS.STL | 58.3KB | |
| bedMount_BSM.STL | 63.9KB | |
| bedmount_thin.stl | 105.5KB | |
| cableMount.STL | 164.8KB | |
| downPlate.DXF | 25.2KB | |
| downPlate.STL | 135.0KB | |
| endStopAdapter.stl | 22.2KB | |
| GBot_FW.rar | 3.6MB | |
| GBot_Tiny_FW_mini12864.rar | 6.4MB | |
| headMount.stl | 76.0KB | |
| idlePulleyMount.STL | 51.5KB | |
| lcd_mount.stl | 33.9KB | |
| Mini12864PanelMount_Fysetc_TinyANRA.dxf | 29.9KB | |
| printHeadMount.STL | 73.7KB | |
| printHeadMountWedge.STL | 11.4KB | |
| rodMount.STL | 80.8KB | |
| rollersMount.STL | 18.8KB | |
| sidePlate_I.DXF | 26.8KB | |
| sidePlate_II.DXF | 32.7KB | |
| spoolHolder.STL | 190.2KB | |
| threeButtonMount.STL | 40.1KB | |
| twinfan.stl | 109.5KB | |
| twinTurboMount.STL | 104.3KB | |
| upPlate.DXF | 51.2KB | |
| upPlate.STL | 513.0KB | |
| upRodMount.STL | 118.8KB | |
| xBridge.stl | 30.7KB | |
| xEndstopFlag.STL | 40.3KB | |
| xRailSupport.DXF | 31.6KB | |
| yEndstopFlag.STL | 58.9KB | |
| yEndstopSpacer.STL | 22.9KB | |
| zBearingDown.STL | 53.5KB | |
| zBearingUp.STL | 49.1KB | |
| zEndStopSpacer.stl | 51.5KB | |
| zFlag.STL | 25.0KB | |
| zKnob.STL | 166.1KB |
