This is the second version of the Gauges holder (remix), this time is for a Pegboard (or anywhere since it has holes).
It comes in 2 parts, top and bottom, it has an angle around 20° if is placed one belows the other in a 1 inch grid of holes.
Each hole is an 4 mm of diameter and it's thought for M3 screws and nuts.
The grid must by 1 Inch per hole.
Gagues holes are 13mm top and 10mm bottom
| gauges_bottom.stl | 98.1KB | |
| gauges_top.stl | 100.5KB |
