Gatehunter X 3D Printer Model
The file 'Gatehunter X 3D Printer Model' is (dxf,stl) file type, size is 213.5KB.
The file 'Gatehunter X 3D Printer Model' is (dxf,stl) file type, size is 213.5KB.
For all this following the evolution of toothpick style FPV quads this is my latest work in progress. At the moment it's quite unclear if the concept of a 5 inch toothpick will work out but Kabab FPV, Alexandre Arvinte and me are working on the topic of props, motors etc. If you want to join im, here is the frame you need! ;-)
Please watch the Youtube video to get all the details on this frame.
BetaFPV 20A board: http://bit.ly/32RWltq
Motoros that could work on 4S (from smaller to bigger stator volume)
This is the type of chain ring bolt you need: https://www.amazon.com/Response-Alloy-Chainring-Bolts-Single/dp/B07V22H2J1/ref=sr_1_1?dchild=1&keywords=chainring+bolt+6.5mm&psc=1&qid=1572202457&sr=8-1
You can find plenty online or at any good local bike shop.
Make sure it is less than 6.5mm long and 10mm in diameter.
Required frame parts:
CHANGELOG
EDIT 25.11.2019: Added 4 Inch Arms
| 46_Toothpick_5_Arm_4mm.dxf | 6.5KB | |
| 47_Toothpick_5_Bottom_Plate_1.5mm.dxf | 8.4KB | |
| 48_Toothpick_5_Top_Plate_1.5mm.dxf | 15.5KB | |
| Arm_V.10_4mm.stl | 120.8KB | |
| Bottom_Plate_1.5mm.stl | 175.1KB | |
| Gatehunter_X_4_Inch_Arm.dxf | 6.5KB | |
| Gatehunter_X_4_Inch_Arm.stl | 128.2KB | |
| Top_Plate_1.5mm.stl | 249.3KB |
![The Calimero [65mm / Toothpick] 3D Printer Model](https://cdn.3axis.co/assets/2d/c3/03/45/2dc30345-4655-4014-88f9-8756cfb7fbf0/images/b3b42edf-f7d1-402b-a5e0-a0eb67edefdc_thumb.jpg)
