Gate For Micro Fpv Racer 3D Printer Model
The file 'Gate For Micro Fpv Racer 3D Printer Model' is (stl) file type, size is 1.5MB.
The file 'Gate For Micro Fpv Racer 3D Printer Model' is (stl) file type, size is 1.5MB.
simple gate for indoor micro FPV racer (up to 120mm). it fits 1.6mm glass fiber rods. an one meter rod will get you a circular gate with 32cm in diameter, which is the curvature of the 3d printed base. it should be mounted to a standard 60cm traffic cone.
25% infill
0.2mm layers
print it with the flat side down and you won't need any supports
share it if you print it :)
| suporte_microgate_1m.stl | 3.6MB |
