Gaslands – Car Upgrades 3D Printer Model
The file 'Gaslands – Car Upgrades 3D Printer Model' is (stl) file type, size is 8.1MB.
The file 'Gaslands – Car Upgrades 3D Printer Model' is (stl) file type, size is 8.1MB.
=================================================================
I am no longer active on Thingiverse. You can find my newest files on MMF here:
https://www.myminifactory.com/users/sablebadger
I produce tons of great quality models for all sorts of tabletop gaming on my Patreon:
https://www.patreon.com/sablebadger
Gaslands is a tabletop game of post-apocalyptic vehicular mayhem. With fast and cinematic rules, it is designed to be played with toy cars, allowing players to ram, skid and race their way through the wreckage of a burnt-out Earth.
Working on a few bits and parts to help make your Gaslands cars truly ready for Race Day. I made little bits of armor plating, spikes for the wheels, and other accessories.
Armor Plating: I made a bunch of different sizes with rivets.
Diamond Plate: added some diamond plate sheets, and one with a gun/view port built in. The sm pattern pushed the limit of my machine for detail, so test medium and small first.
Poles: a bunch of "things" on poles to attach to your cars to get that proper "war boys" look for your hot rods. They will print with a flat on one side, but you can't really see it at scale when it's glued on, and the flat helps you get some bed adhesion.
Flags: The flags are printed really thin, with the idea that you can use a little heat to set in the "wave" or just bend them with your fingers.
Wheel Spikes: I included a thin connecting strip to hold the set of four together while printing and help with bed adhesion. You can easily cut the strip off with scissors or a craft knife. Also made four different styles of spikes as well.
New front Rams: Added two versions with "jagged metal blades" and a skull ram.
Pipes: Side mounted pipes of various configurations, meant to be glued to the side of a car. If they don't sit flush on a curved surface you can probably blast them with a hair dryer on High and bend them a little.
VERY IMPORTANT: To have any success with these models print "low and slow". I use 0.08 layer height, and HALF my printer speed, and they come out pretty good.
| 4Gaslands_-_Upgrades_-_Wheel_Spikes_3.stl | 82.5KB | |
| Gaslands_-_Upgrades_-_Flag1.stl | 54.6KB | |
| Gaslands_-_Upgrades_-_Flag2.stl | 65.4KB | |
| Gaslands_-_Upgrades_-_Skull_Stick.stl | 484.7KB | |
| Gaslands_-_Upgrades_-_Spear.stl | 238.1KB | |
| Gaslands_-_Upgrades_-_Trident.stl | 40.7KB | |
| Gaslands_-_Upgrades_-_Wheel_Spikes_1.stl | 55.1KB | |
| Gaslands_-_Upgrades_-_Wheel_Spikes_2.stl | 29.0KB | |
| Gaslands_-_Upgrades_-_Wheel_Spikes_3.stl | 125.0KB | |
| Gaslands_-_Upgrades_Armor_Plate_1.stl | 1.0MB | |
| Gaslands_-_Upgrades_Armor_Plate_2.stl | 745.1KB | |
| Gaslands_-_Upgrades_Armor_Plate_3.stl | 527.2KB | |
| Gaslands_-_Upgrades_Armor_Plate_4.stl | 504.6KB | |
| Gaslands_-_Upgrades_Armor_Plate_5.stl | 376.1KB | |
| Gaslands_-_Upgrades_Armor_Plate_6.stl | 666.9KB | |
| Gaslands_-_Upgrades_Armor_Plate_7.stl | 256.5KB | |
| Gaslands_-_Upgrades_Armor_Plate_8.stl | 263.1KB | |
| Gaslands_-_Upgrades_Armor_Plate_9a.stl | 591.4KB | |
| Gaslands_-_Upgrades_Armor_Plate_9b.stl | 557.2KB | |
| Gaslands_-_Upgrades_diamond_plate_med_pattern.stl | 1.3MB | |
| Gaslands_-_Upgrades_diamond_plate_med_pattern_with_port.stl | 1.3MB | |
| Gaslands_-_Upgrades_diamond_plate_sm_pattern.stl | 2.1MB | |
| Gaslands_-_Upgrades_diamond_plate_sm_pattern_with_port.stl | 1.0MB | |
| Gaslands_Pipes_-_four_spray_v.1.0.stl | 1.6MB | |
| Gaslands_Pipes_-_one_three_perforated_long_v.1.0.stl | 1.1MB | |
| Gaslands_Pipes_-_three_angled_perforated_v.1.0.stl | 1.4MB | |
| Gaslands_Pipes_-_three_upright_v.1.1.stl | 428.2KB | |
| Gaslands_Pipes_-_two_three_perforated_v.1.0.stl | 1.0MB | |
| Gaslands_Ram_Five_Jagged_Blades_v1.0.stl | 65.3KB | |
| Gaslands_Ram_Many_Jagged_Blades_v1.0.stl | 114.4KB | |
| Gaslands_Ram_Skulls_1.0.stl | 3.1MB | |
| Gaslands_Weapons_-_spike_strip.stl | 11.5KB |
