Garud-500 DIY Drone 3D Printer Model Download Free STL File

Description Files

Summary

Garud-500 is a fully 3D Print ready DIY Drone Design kit, specially developed for enthusiasts who dream to build their very first custom drone using 3D Printing. This Garud-500 can be 3D printed in commonly used PLA or ABS material and can be assembled without any hassles. The main frame board i.e. Top & Bottom Plate are designed to bear excessive forces during acrobatic flights while the arms are designed with landing gears to reduce additional connecting weight & prevent damage during landing.

Garud-500 can be 3d Printed with below print specifications:

Layer Height: 200 - 300 Microns
Infill: 30% (50% for more strength)
Infill Pattern: Rectilinear
Shell Thickness: 0.8mm - 1.2mm
No Support required
Rafts Enabled
Temperature - 210 C PLA | 230 C ABS

BOM - (Choose your parts wisely)

4 x Arms (3D Printed)
1 x Top Plate (3D Printed)
1 x Bottom Plate (3D Printed)
16 x M5 Bolts 20mm length
16 x M5 Nuts
4 x Brushless Motors (2206 - 3600 Series | 700KV - 1200 KV)
4 x ESC’s (30A - 40A)
4 x Propellers (8045 | 9050 | 9060 | 1045 | 1050)
1 x Flight Controller (Naze 32 | Open CC3D | APM 2.7 | Pixhawk | DJI Naza V2)
1 x Lipo Battery (2200mah - 5000mah | 3S - 4S)
1 x Radio Controller (Taranis | Flysky Fs-i6)

Arm.stl

Bottom_Plate_V1.stl

Top_Plate_V1.stl

Garud-500 DIY Drone 3D Printer Model

Summary

Tags

You might also like