Have your pegs snapped off the back mount?
Print the lower mount, One of the upper mounts, slide on to the shaft, push in the insert pins.
Align the control box fins and screw in place with 4 mm x 44 mm (total length) drywall screws, also uses the lower speaker grill screws.
| Garrett_AT_Control_Box_Support.stl | 185.7KB | |
| Garrett_AT_Control_Box_Support_1.stl | 472.5KB | |
| Garrett_AT_Control_Box_Support_2.stl | 536.3KB | |
| Garrett_AT_Control_Box_Support_3.stl | 494.7KB | |
| Garrett_AT_Control_Box_Support_4.stl | 25.1KB |
