Garmin UHD2 95SV Sun Shade 3D Printer Model
The file 'Garmin UHD2 95SV Sun Shade 3D Printer Model' is (3mf,stl) file type, size is 47.3KB.
The file 'Garmin UHD2 95SV Sun Shade 3D Printer Model' is (3mf,stl) file type, size is 47.3KB.
Basic sun shade for the Garmin UHD2 95sv. Nothing fancy, just something thin and light so it doesn't add too much weight to the unit and doesn't obstruct the mount. Although it's not in the photos - I recommend painting the inside matte black to stop any sun coming through, and reducing reflections.
It accommodates access to the buttons and you can still use the Garmin cover at the same time.
Remove the top and bottom black covers on the unit to access the holes for the screws. Use M4x12 or 16mm allen head screws and bolts. Holes may need to be drilled out a bit to align them better with the unit's holes.
Printed in PETG - better sun resistance. Printed with 4 walls, around 30% infill. It needs a big print bed due to the size. You could print it vertically with a lot of support.
| Garmin_UHD2_95SV_Shade.3mf | 27.4KB | |
| Garmin_UHD2_95SV_Shade.stl | 103.8KB |
