Garmin Striker Ram Mount (1″ Diameter Ball Joint) 3D Printer Model
The file 'Garmin Striker Ram Mount (1″ Diameter Ball Joint) 3D Printer Model' is (STL) file type, size is 952.7KB.
The file 'Garmin Striker Ram Mount (1″ Diameter Ball Joint) 3D Printer Model' is (STL) file type, size is 952.7KB.
This is used on my Hobie Sport to mount my Garmin Striker 4 to a T-slotted rail I've customized for my Hobie. The T-slotted rails can be purchase at the site referenced below:
https://8020.net/shop/1010-black.html
or
https://8020.net/shop/1050-black-fb.html
Part 1-1 is the base mount with a 1" diameter ball joint. You will need to use a 1/4-20 Threaded tap to tap the center hole for use with threads. I use a 1/4-20 socket head screw from Mcmaster Carr for mounting to the rail:
McMaster # 92562A276 Mil. Spec. Alloy Steel Socket Head Screw, 1/4"-20 Thread Size, 1-1/2" Long
and
McMaster # 47065T139 T-Slotted Framing, Compact End-Feed Fastener, for 1" High Single Rail
Part 1-2 is one half of the mounting arm shell that will require a 1/4-20 tap to be threaded thru. the fasten knob used with the arms can be purchased below:
McMaster #91185A929 Plastic-Head Thumb Screws, Two-Arm, 1/4"-20 Thread, 1-1/2" Long
https://www.mcmaster.com/#thumb-screws/=1cftzkj
| 1.STL | 465.9KB | |
| 2-1.STL | 724.8KB | |
| 2.STL | 724.8KB | |
| 3.STL | 544.5KB |
